Table of Contents
Advertisement
Programming 2-way remote
Disable remote receiving
You may turn off the 2-Way remote receiving signal from the main unit. Press button
simultaneously for 2sec. until one long beep is heard. Remote receiving is now
disabled. To turn on receiving again, Press button
beep is heard, remote receiving is now enable.
2-way LCD display :
2way remote button ON/OFF
For safety purpose, this 2-way remote can be lockout the remote button in order not to
mis-touched the buttons. Press button
button is now locked. To turn on remote button, press button
beeps is heard, remote button is now unlocked.
2-way LCD display :
Vibrate mode on/off
Press button
for over 2sec. the 2-way remote will respond tone & vibrate feature,
the button
pressing 2sec. will change the feature, see under table:
Beeps
1-beep
1-beep
If set with vibration only
the 2-way LCD will display :
for over 2sec. until one beep is heard, remote
Vibrations
2-way remote feature
1-time
Remote with tone and vibration
1-time
Remote with vibration only
Remote with tone only
-9-
simultaneously until two long
for over 2sec. until two
Hide quick links:
Advertisement
Table of Contents
