Eaglemaster E4 User Manual page 19

Two way car alarm
Table of Contents

Advertisement

Control Channel (-) features:
- Comfort /window close :
If programmed with the feature, this channel will constant output for 30sec. When arming the system.
- 2nd stage door unlock:
If programmed with the feature , to operate it by press button
will be output for passenger side .
- Remote latched:
If programmed with the feature, to operate it when ignition off, press button
siren will give 1 chirp and the Channel will constant output.
To exit by ignition off and press button
the channel will stop output.
- Dome Light:
If programmed with the feature , the channel will constant output 30sec. when disarming . Turn
ignition switch ON will stop the channel output.
- Pager :
If programmed with the feature, this channel will output when system trigger .
-Arm W/Engine running:
If programmed with the "Arm W/Engine running, this feature for the car to keep engine running after
arriving at your destination.
To operate this feature by pressing
chirp and the LED will start flashing Green color, at the time the system is in standby mode, the
owner must follow under process to activate the "Arm W/Engine running " mode.
(1) Within 15sec. Turn Ignition OFF (engine still keep running), open and close door to leave the car.
Note: If within this 15sec. press any button once will exit the mode, LED off.
(2) While leaving the car by open and close the door, within 5sec. press button
will arm and door lock immediately, the parking lights will keep flashing, and the status LED will
flashing Green color, however the engine will still keep running. The 2-Way remote will respond
under icons flashing as long as turbo time finished.
2-way LCD display :
Exit mode :
Pressing button
will exit turbo mode and turn back in armed position.
NOTE:
1. In engine running mode, the sensor zone trigger will be bypassed until the programme
time finished.
2. In engine running mode, if door, hood or trunk has been triggered, engine will stop
running and alarming the system, simply press button
for 2sec. while driving or ignition ON , the siren will give one
Flashing
once of the remote control within engine running mode , the system
at 2nd time , 2nd stage door unlock
over 2 seconds, siren will give 2 chirp and
Note:
(1) After leaving the car, within 5sec.
If press wrong button will exit mode.
(2) After leaving the car, within 5sec.
If without press
mode automatically.
to disarm the system.
for over 2sec.,
once, the system
button will exit

Advertisement

Table of Contents
loading

Table of Contents