Programming 2-Way Remote - Eaglemaster E1 Plus Instruction Manual

Alarm Page
If the alarm system is triggered while armed, an Alarm Page will be sent to the remote
control. When the remote receives an Alarm Page, the LCD icons will display the alarm
system status information and the remote control will generate beeps.
Display
Page Recognition (Acknowledgement)
To clear a page alert/notification, quickly press any button on the remote control. This
can be performed at any time during or after the page notification has occurred.
The remote control will not send a command to the system at this time; it will only clear
future repeats of the page notification. The next time a button is pressed on the remote
control it will send a command to the system.
Check in-range notification (programmable)
If programmed with the feature, arming the system within 5 minutes the 2-way remote will
provide 1 beep sound per minutes indicate 2-way remote within range.
Note: If the 2-way remote out of range , the 2 beeps/ 3cycles and flashing icon
given. However, afterwards if the 2-way remote detect the signal again from the
system, 1 beep sound will be provided and flashing icon
2-way remote is within range.

Programming 2-way remote

Disable remote receiving
You may turn off the 2-Way remote receiving signal from the main unit. Press button
simultaneously for 2sec. until one long beep is heard. Remote receiving is now
disabled. To turn on receiving again, Press button
beep is heard, remote receiving is now enable.
Remote button 1.2.3 on/off
For safety purpose, this 2-way remote can be lockout the remote button in order not to
mis-touched the buttons. Press button
button is now locked. To turn on remote button, press button
beeps is heard, remote button is now unlocked.
Beeps Vibrations
1 times
5 short
1 times periodically
Melody 1
2 times periodically
Melody 2
3 times periodically
Melody 3
4 times periodically
Melody 4
5 times periodically
Melody 5
for over 2sec. until one beep is heard, remote
-5-
Trigger
Sensor warning
Shock sensor triggering
Trunk switch triggering
Door switch triggering
Hood switch triggering
Ignition triggering
will be off to indicate the
simultaneously until two long
for over 2sec. unitl two
will