Remote Trunk Open - Eaglemaster E4 User Manual

- Arming without Remote control:
This function gives you a possibility to Arm and Disarm the system use original key and Valet
switch, After driving and ignition keep ON , open the door, then turn off the ignition Key and
press the Valet switch once, then closed the door, the system will armed immediately.
Note: if programmed with Passive arm feature, this feature will not activated.
Note: if you failure to lock the door with original key within 15sec., then you may repeat
it's procedure again
(This specify procedure to avoid any false arm the system through indoor switch or
other situation etc.,..)
- 2 step disarm:
This system offers 2 step disarm. It's a feature that make it possible to silence and reset
the system while it is triggering, without disarming the system. If the system is triggered
and the siren has been sounding, pressing any button once on the remote transmitter will
stop the trigger and return the unit to the armed state.
Note: If press 2-way remote control button once, will stop the beep sound and LCD display
will indicate the intrusion icon for 2sec. Press any button again to stop alarm triggering.

- Remote trunk open:

Simply press and hold button
this feature normally for open the trunk.
2-way LCD display :
Note:
If trunk has been remote opened in arming position, trunk switch will delay sensing for
30 seconds, and the shock sensor will be bypassed.
over 2 seconds, the channel will output for 1 second pulse ,
In Armed position, if remote trunk open, the 2-way
LCD will display trunk icon and give one beep .
If trunk closed, trunk icon off and give one beep.
If still keep opened, after 1Min. The 2-way remote will
give pre-warn beep sound.