Eaglemaster E4 User Manual page 26

Item
NO:
LED
flash
11 Door switch arming delay
1-way remote reminder arm/disarm
12
status to 2-way remote
13 CH-2 (gray wire) feature
14 CH-3 (white/black wire) feature
15 CH-4 (yellow/black) feature
16 Time for (engine run / turbo mode)
17 Door lock for Turbo mode
18 Emergency disarm by Valet SW / PIN
19 Red/black wire positive (+) input
CH-5 (Gray/black wire) programme
output :
20
-A rming output 1~120sec..
-Press button
21 Factory default
W/O : means without the feature
Note: means factory default setting before delivery.
PROGRAMME FEATURES TABLE
FEATURES
+ output 1~120sec.
Press button
1-chirp
*8sec.
*W/I
*Window
*Turbo
mode
*Trunk
*1 min.
W/I
*Valet
* Reverse
warning
w/i chirp
Press button
counting time , after your desire time if press button:
1. If press
for programme time when arming.
1-2. If press
for programme time by press buttons to activate.
2. After programmed step 1-1 or 1-2, if press
once, to jump next programme mode by siren
give 1 long chirp.
2-1. After programmed step 1-1 or 1-2, if press
button once, to programme pulse delay time 1~120
sec., after your desire time press
It will auto jump to next item by give 1 long chirp.
Press button
and all features back to factory default.
W/I : means with the feature
Press button
Press button
2-chirp 3-chirp
15sec. 60sec.
W/O
Arming
Remote
w/engine
latched
running
2nd stage
door Trunk
unlock
Dome
Remote
Light
latched
3 min. 5 min.
*W/O
*PIN
Reverse
Door
warning
lock
w/o chirp
once, siren will give 1-chirp and in
button once, siren will give 2-chirp
button once, siren will give 2-chirp
once, siren give 1 long chirp
Press button
4-chirp
Pager
Dome
Light
Turbo
mode
10 min.
AV sw
for 2nd step
disarm
button again.