Way Lcd Intrusion Alert - Eaglemaster E8 User Manual

- Intrusion Alert by status LED :
Upon disarming the system, if the vehicle is attempted or intruded, siren and lights will
Indicates 5 chirps and 5 flashes to identify which zone was triggered. LED mode indicates
the following different triggering.

- 2-way LCD Intrusion Alert:

Upon disarming the system, if the vehicle is attempted or intruded, the 2-way remote will
respond 2 short beep follow with melody sound, and LCD display will indicates different
icons as under:
Zone1: 1st-stage
sensor triggered
Zone2: 2nd-stage
sensor triggered
Hood switch triggered
Note: Before the ignition turn on, you may realized again which zone been triggered by
Press
flash 2 times after a pause
flash 3 times after a pause
flash 4 times after a pause
flash 5 times after a pause
flash 6 times after a pause
Flash 7times after a pause
Zone1: 2nd-stage
sensor triggered
Door switch triggered
Ignition switch triggered
button (status check) once, the LCD will display triggered zone again.
Sensor 1st-stage triggered
Sensor 2nd-stage triggered
Door switch triggered
Hood switch triggered
Trunk switch triggered
Ignition switch triggered
Zone2: 1st-stage
sensor triggered
Trunk switch triggered