Canon GP215 Service Handbook page 125

6. Key/Editor Indication (7th screen)
Item
KWY-CHK Indicates the code of a specific key that is being pressed (except the Reset key). (See
the next page.)
DF-SIZE Indicates the size of the original detected by the ADF or the RDF.
EDIT-X Indicates the editor input coordinates.
EDIT-Y EDIT-X:
EDIT-Y:
DOC-SIZE Indicates the size of the original detected by the original size sensor.
TKEY Touch Panel
• Press 'TKEY' to highlight; then, press the OK key (All messages turn OFF.). Then,
when the touch panel is pressed the area will become highlighted (reverse video). After
the check, press the Reset key to end service mode.
*1* DISPLAY 06
KEY-CHK : xxH
DF-SIZE : xx
EDIT-X : xxx.xmm
EDIT-Y : xxx.xmm
DOC-SIZE : xxxxxx
TKEY (OK : START)
X direction
Y direction
CANCEL
+
–
OK
Description
SERVICE MODE
7–17