R E D D S M C O P E R AT I O N G U I D E
NAVIGATION CONTROLS
This section describes basic controls for navigating the DSMC menus.
TOUCHSCREEN NAVIGATION
RED Touch displays offer intuitive menu control and four (4) programmable buttons.
1
2
3
4
#
RED TOUCH BUTTON
1
User Key 1
2
Up Button
3
Down Button
4
User Key 2
Navigate the menus using a touchscreen by using the following gestures:
Tap: Tap has many functions:
‒
Tap to select a Basic Menu, submenu, or button.
‒
If a menu is open, tap anywhere outside the menu to save any changes and close the menu.
‒
Tap the right or left regions of the touchscreen to access the programmable soft keys.
Swipe: Swipe to select different values in spinners or drop-down menus. For more information, go to
"Swipe-Up Menu" on page 60.
Double-Tap: If the monitor is in Clean mode, changes to Overlay mode.
Hold: Tap and hold an icon to bring up an advanced interface display.
Pinch: Move two (2) fingers apart/together to increase/decrease the size of the image. By default, this
gesture is disabled.
For more information, go to
COPYRIGHT © 2015 RED.COM, INC
DESCRIPTION
Toggle 1:1 Magnify on/off
Increase display brightness
Decrease display brightness
Toggle Exposure Mode on/off
"Gestures" on page
74.
RED Touch 7.0" LCD
955-0020_V6.0, REV-D |
59