Set Up Audio; Audio Input (Source) Options - RED EPIC-M DRAGON Operation Manual

R E D D S M C O P E R AT I O N G U I D E

SET UP AUDIO

To set up audio, go to Menu > Settings > Audio, and adjust the input, pre-amplifier, headphone, and mix settings.

AUDIO INPUT (SOURCE) OPTIONS

SOURCE NAME
NONE
CAM ANALOG
PRO I/O ANALOG
PRO I/O AES A
PRO I/O AES B
NONE
Select NONE to disable recording audio.
CAM ANALOG AND PRO I/O ANALOG (MICROPHONE)
The DSMC provides two (2) microphone jacks for recording two (2) channels of microphone level analog audio.
The Pro I/O Module provides two (2) XLR connectors for recording two (2) additional channels of microphone
level audio. The sensitivity of the microphone and the pre-amp gain determine the recording level of the
microphone input.
PRO I/O ANALOG (LINE IN)
The Pro I/O Module provides two (2) XLR connectors for recording two (2) channels of line level analog audio.
Line input passes without gain through the system. The signal provided by the field production mixer or other
external line level source determines the recording level of the line input.
NOTE: Line level audio is only available via the Pro I/O Module.
PRO I/O AES A/B (DIGITAL INPUT)
The AES connector on the Pro I/O Module allows an input of 24-bit, 48 KHz AES digital audio.
NOTE: Digital input audio is only available via the Pro I/O Module.
COPYRIGHT © 2015 RED.COM, INC
CHANNEL PAIRS
N/A
Ch1/Ch2, Ch3/Ch4
Ch1/Ch2, Ch3/Ch4
Ch1/Ch2, Ch3/Ch4
Ch3/Ch4
MODULE
N/A
DSMC BRAIN
Pro I/O Module
Pro I/O Module
Pro I/O Module
CONNECTORS
N/A
MIC-1, MIC-2
AUDIO 3, AUDIO 4
AES
AES
955-0020_V6.0, REV-D | 139