Navigation Controls; For More Information, Go To - RED Epic Operation Manual

R E D D S M C O P E R AT I O N G U I D E
 Yellow: 5 to 10 minutes
 Red: <5 minutes

NAVIGATION CONTROLS

This section describes basic controls for navigating the DSMC menus.
TOUCHSCREEN NAVIGATION
RED Touch displays offer intuitive menu control and four (4) programmable buttons.
1
2
3
4
# RED TOUCH BUTTON
1 User Key 1
2 Up Button
3 Down Button
4 User Key 2
Navigate the menus using a touchscreen by using the following gestures:
 Tap: Tap has many functions:
‒ Tap to select a Basic Menu, submenu, or button.
‒ If a menu is open, tap anywhere outside the menu to save any changes and close the menu.
‒ Tap the right or left regions of the touchscreen to access the programmable soft keys.
 Swipe: Swipe your finger to select different values in spinners or drop-down menus.
 Double-Tap: If the monitor is in Clean mode, changes to Overlay mode.
 Hold: Tap and hold on an icon to bring up an advanced interface display.
 Pinch: Touch with two (2) fingers, then open or close to magnify or normalize the image. By default, this
gesture is disabled.

For more information, go to

COPYRIGHT © 2015 RED.COM, INC
DESCRIPTION
Toggle 1:1 Magnify on/off
Increase display brightness
Decrease display brightness
Toggle Exposure Mode on/off
"Gestures" on page 71.
RED Touch 7.0" LCD
955-0020_V5.3, REV-J | 57