Ctrl (Rs232 Control) - RED EPIC-M DRAGON Operation Manual

R E D D S M C O P E R AT I O N G U I D E
COMPATIBLE CABLES
 790-0154: 3BNC-to-00 LEMO Sync Cable
 790-0187: 4-Pin 00 LEMO-to-Flying Lead
 790-0415: RED Start/Stop Cable (14-Pin LEMO to SYNC, CTRL, BNC)
 790-0428: RED Start/Stop Cable (14-Pin to 00B SYNC)

CTRL (RS232 CONTROL)

The 4-pin 00B LEMO CTRL connector supports RS232 remote control for 3D camera communication and third-
party metadata ingest applications. For more information, go to
The General Purpose Out (GPO) tally presents 3.3 V at a maximum of 0.04 A between pins 1 and 3. When used
as a record tally, the rising edge of the pulse indicates start of record, falling edge represents end of record.
For more information about controlling the DSMC via RS232, download the
red.com/developers.
1 4
2 3
PIN SIGNAL
1 GROUND
2 232 RX
3 SS/GPO
4 232 TX
NOTE: Mating connector is FGG.00.304.CLAD27Z.
COMPATIBLE CABLES
 790-0154: 3BNC-to-00 LEMO Sync Cable
 790-0187: 4-Pin 00 LEMO-to-Flying Lead
 790-0415: RED Start/Stop Cable (14-Pin LEMO to SYNC, CTRL, BNC)
COPYRIGHT © 2015 RED.COM, INC
4-PIN 00B LEMO CTRL CONNECTOR
DESCRIPTION
Common ground
RS232 RX
Shutter sync/general purpose output
RS232 TX
"BRAIN GPIO" on page
REDLINK SDK, available at
Front Face of the CTRL (RS232)
Connector (Looking at the DSMC)
955-0020_V6.0, REV-D |
104.
www.
DIRECTION
N/A
In
Out
Out
200