Setup – Using the Commission Wizard
6. Using the Type drop down menu selection,
select the Gyro Compass type.
7. In the Heading Field, enter in the Vessel's
current heading value (xxx.x Degrees format).
Note: NMEA, No Gyro, and 1:1 Synchro Type selections
do not require heading entry.
8. Click on "Next".
The Modem section allows you to define the satellite
modem "Type" and "I/O".
For more information, refer to the Configuring The
Satellite Modem Interface chapter.
5-3
5012-91 Installation Manual