5012-91 Installation Manual
11. In the IP Address boxes, enter "10.1.1.102" (This
is for the IP address of your computer).
NOTE: You could use 101, 102, 103, etc. as long as it is
not the same as the address of the MXP, which is
"10.1.1.100" (default).
12. On the second line, enter Subnet Mask of
"255.255.255.0".
13. Then click the "OK" button.
14. Back at the Local Area Connection Properties
screen, click the "OK" button.
15. Click the "Close" button.
4-4
Configuring a Computer for the MXP