Table of Contents
Advertisement
5012-91 Installation Manual
Radome Assembly (76 Inch)
Type
Material
Size
Diameter
Height
Hatch Size
Weight
RF attenuation
Wind:
Ingress Protection Rating
Radome Assembly (81 Inch) w/ base frame
Type
Material
Size
Diameter
Height
Base Frame Height
Overall Height
Hatch Size
Radome Weight
Base Frame weight
RF attenuation
Wind:
Ingress Protection Rating
ADE Environmental Conditions
Temperature Range (Operating)
Humidity
Wind Speed
Solar Radiation
Spray
Icing
Rain
Corrosion
5012-91 Ku-Band Technical Specifications
Frequency Tuned
A sandwich
1.93 m / 76" (2.01m max flange diameter)
1.61 m / 63.44"
X.XXm x X.XXm / XX" x XX" (min)
90.7 kg / 200 lbs
Less than 0.2 dB @ 10.75-14.5 GHz dry
Withstand relative average winds up to 56m/sec
(125 MPH) from any direction.
IP 56
Standard
DIVINYCELL H100
2.05m / 80.8"
1.9m / 75" W/O base frame
0.55m / 21.75 in
2.46m (96.9")
158.76 Kgs / 350 lbs
140.16 Kgs / 309 Lbs
Typical 0.5 dB
Withstand relative average winds up to 56m/sec
(125 MPH) from any direction.
IP 56
-25º to +55º Celsius (-13º to +131º F)
100% Condensing
56 m/sec (125 mph)
1,120 Watts per square meter, 25º Celsius
Resistant to water penetration sprayed from any
direction.
Survive ice loads of 4.5 pounds per square foot.
Degraded RF performance will occur under icing
conditions.
Up to 101.6mm (4 inches) per hour. Degraded RF
performance may occur when the radome surface
is wet.
Parts are corrosion resistant or are treated to
endure effects of salt air and salt spray. The
equipment is specifically designed and
manufactured for marine use.
18-6
Advertisement
Table of Contents
