Electrical Precautions - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 198 Wednesday, February 13, 2008 4:31 PM
MAINTENANCE

Electrical Precautions

Be aware of the following DO's and DON'Ts regarding the electrical system, in order to
avoid disruption of electrical signals and possible system malfunction.
DO's
• DO use ONLY genuine VICTORY parts and accessories designed for your model and
follow the instructions provided.
• DO use the accessory power jack provided in the glove compartment or in the trunk
(Tour model). The glove compartment Accessory Power power jack is powered
whenever the ignition key is in the ON or ACC position. The trunk Accessory Power
jack is powered at all times.
• If it is necessary to provide power to an item that does not use one of the previously
mentioned power supply jacks, connect to the load side of the main circuit breaker
(located under the cover behind the oil cooler) and connect the ground wire to the
engine ground at the front left side of the crankcase (near the circuit breaker).
(Continued on next page)
198