Drive Belt Tension Adjustment - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 151 Wednesday, February 13, 2008 4:31 PM

Drive Belt Tension Adjustment

1. Move wheel to the tight spot location determined
previously in Drive Belt Tension Inspection.
2. Loosen the rear axle nut (1) on the left side.
3. Using a 13 mm deep socket, turn each axle
adjuster nut (2) clockwise an equal amount to
tighten the belt (reduce deflection) or an equal
amount counter-clockwise to loosen the belt
(increase deflection).
4. Tighten rear axle nut to proper torque.
Rear Axle Nut Torque: 65 lb-ft. (88 Nm)
5. Pump the rear brake pedal to re-set the pads
against the brake disc.
6. Verify proper belt tension (page 147) and wheel
alignment (page 152).
MAINTENANCE
Nut is hidden by
1 swingarm. (Shown
2
for clarity)
151