Air Filter - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 143 Wednesday, February 13, 2008 4:31 PM

Air Filter

The standard VICTORY air filter element is a dry
paper design and does not require the use of air
filter oil. Inspect the air filter often if riding in
unusually wet or dusty conditions.
1. Remove the two air filter retaining screws.
2. Pull the lower edge of the filter toward the front
of the motorcycle then lower it to release the two
tabs at the top edge. Remove the filter.
3. Clean the filter sealing surface on the frame.
4. Install the new air filter, engaging the tabs at the
top of the filter with the filter case.
5. Install retaining screws.
6. Torque screws to 87 lb- in. (10 Nm).
MAINTENANCE
Tabs
Screws
143