Throttle Control Inspection - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 161 Wednesday, February 13, 2008 4:31 PM

Throttle Control Inspection

With the engine OFF, rotate the throttle control grip
fully open and then release it.
1. Repeat the twist and release process with the
handlebars turned fully RIGHT and fully LEFT.
2. Verify that the throttle grip moves smoothly
throughout the range of motion and returns to its
rest position freely and completely when
released.
3. Remove the triangular cover from the right side
of the motorcycle by pulling straight outward at
each corner to release the three tabs. Inspect
cables for frayed ends. Contact your VICTORY
dealer if throttle operation is not smooth, if the
throttle grip does not return properly, or if cable
ends are frayed.
MAINTENANCE
Cable Area
161