Electrical Precautions - Victory 2012 Ness Signature Series Rider's Manual

Maintenance

Electrical Precautions

Be aware of the following "DO's" and "DO NOT's" regarding the electrical system to avoid
disruption of electrical signals and possible system malfunction.
DO:
• DO use ONLY genuine VICTORY parts and accessories designed for your model and fol-
low the instructions provided.
• DO use the accessory power jack provided in the glove compartment (or trunk). The glove
compartment power jack is powered whenever the ignition key is in the ON or ACC posi-
tion. The trunk power jack is powered at all times.
• If it is necessary to provide power to an item that does not use one of the previously men-
tioned power jacks, connect to the load side of the main circuit breaker (under the cover
behind the oil cooler), and connect the ground wire to the engine ground at the front left
side of the crankcase (near the circuit breaker).
DO NOT:
• DO NOT splice or cut any wires.
• DO NOT tap in to any power or ground on the motorcycle unless specifically directed to
do so by the VICTORY instructions that come with the kit.
• DO NOT back-probe electrical connectors on the vehicle unless directed to do so by the
Service Manual.
• DO NOT power any accessories from the diagnostic connector (inside the left saddlebag
near the rear suspension air pressure label).
90