visionownersmanual.book Page 102 Wednesday, February 13, 2008 4:31 PM
PRE-RIDE CHECKS
Check Drive Belt
The drive belt should fit tightly. Check drive belt
tension (see page 147). The drive belt system must
be cool, clean, and dry to accurately measure belt
tension (deflection). Do not measure or adjust the
drive belt when the belt or drive system is wet or
when it is hot, such as immediately after riding.
Drive Belt
Check the drive belt teeth for stones or other debris.
Replace the drive belt if it is cracked, has broken
teeth, missing teeth, or frayed edges (see the
service manual or an authorized VICTORY dealer).
102