Victory 2009 VISION Rider's Manual page 193

visionownersmanual.book Page 190 Wednesday, February 13, 2008 4:31 PM
MAINTENANCE
Seat Removal / Installation
To remove the seat:
1. Open the glove compartment door and fuel door.
2. Lift the console trim panel straight upward at each
corner to remove it. Do not tip the panel backward.
3. Remove the two seat bolts (4mm Allen).
4. Lift the front of the seat upward and pull forward to
disengage the tab at the rear of the seat.
5. To install, reverse the above process, being sure to
engage the tab at the back of the seat.
6. Torque seat bolts to 36 lb-in (4 Nm).
190
Seat Bolts