Victory 2009 VISION Rider's Manual page 71

visionownersmanual.book Page 68 Wednesday, February 13, 2008 4:31 PM
INSTRUMENTS, FEATURES, & CONTROLS
RIGHT HANDLEBAR CONTROLS
Engine Stop / Run Switch
The engine stop/run switch completes or interrupts
Run
the ignition, starter, and fuel pump circuits.
To complete the circuits, allowing the engine to start
and run, press the lower portion of the engine stop/
run switch (RUN position).
To interrupt the circuits, press the upper portion of
the switch (STOP position). The engine should not
start or run when the switch is in the STOP position.
Use the engine stop/run switch to turn the engine off
under either normal or emergency conditions. Turn
the key OFF after the engine stops.
RIGHT Handlebar Switch
68