Clutch Fluid - Victory 2009 VISION Rider's Manual

visionownersmanual.book Page 169 Wednesday, February 13, 2008 4:31 PM

Clutch Fluid

Review Brake Fluid Precautions on page 168
1. Set the vehicle upright on a level surface and
turn handlebars until top of reservoir is level.
2. View the fluid level through the sight glass.
3. If level is low, check hoses, lines, and slave
cylinder (on left rear of crankcase) for leaks.
4. To add fluid, remove the three reservoir cover
screws, cover, and diaphragm.
5. Add DOT 4 Brake Fluid from a sealed container
to the proper level. Reinstall the cover and
torque screws to 25 lb-in. (3 Nm). Wipe cap
area clean to remove any brake fluid.
6. Check for any signs of clutch fluid leaks around
the hoses, fittings, fluid reservoir, and slave
cylinder. Check for deterioration of hoses.
MAINTENANCE
Minimum Level
.
Slave Cylinder
169