Other Unix Systems - LevelOne FBR-1800TX User Manual

LevelOne FBR-1800TX Broadband Router User Guide
1. In your X Windows shell, select Control Panel, then Printer Configuration.
2. Select Add. For the printer type, select Remote Unix (lpd) Queue.
3. Use the following data to complete the resulting dialog.
Field
Name
Spool Directory
File Limit
Remote Host
Remote Queue
4. Save this data, and exit the Printer Configuration. Configuration is now completed, and
the printer is now available for use.

Other Unix Systems

To access the Internet via the LevelOne FBR-1800TX Broadband Router:
•
Ensure the "Gateway" field for your network card is set to the IP Address of the LevelOne
FBR-1800TX Broadband Router.
•
Ensure your DNS (Name Server) settings are correct.
Printing Setup
To use LPD printing to the LevelOne FBR-1800TX Broadband Router's printer, install an LPD
printer using the standard procedure for your system.
•
Use the LevelOne FBR-1800TX Broadband Router's IP Address as the location of the
remote host
•
Use L1, L2, or L3 for the name of the printer on the remote host.
On the LevelOne FBR-1800TX Broadband Router, the logical printers (L1, L2, and L3) can be
configured on the Advanced - Printer Port screen. See Printer Port in Chapter 7 for details.
Data
Enter a name for this printer
/var/spool/lpd/printer_name
Where printer_name is the "Name"
entry above.
Enter a suitable number.
LevelOne FBR-1800TX Broadband
Router's IP address
Note:
If you have made a host file entry, you can use the name from the
host file instead of the IP Address.
Ln
Where n is the Logical Printer number
(L1, L2, L3). Logical Printers can be
configured on the LevelOne FBR-
1800TX Broadband Router's Options-
Printer Port screen.
Example
gw_prn
/var/spool/lpd/gw_prn
0 (no limit)
192.168.0.1
L1
36