LevelOne FBR-1800TX User Manual page 41

LevelOne FBR-1800TX Broadband Router User Guide
Data - Status Screen
Internet
Connection Method
Broadband Modem
Internet Connection
Internet IP Address
"Connection Details"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
"System Data"
Button
Printer
Printer Status
"Abort Current Print
Job" Button
This indicates the current connection method, as set in the Setup
Wizard.
This shows the connection status of the modem.
Current connection status:
•
Active
•
Idle
•
Unknown
•
Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Pro-
vider).
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
The IP Address of the LevelOne FBR-1800TX Broadband
Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Advanced menu.
This displays the current name of the LevelOne FBR-1800TX
Broadband Router.
The current version of the firmware installed in the LevelOne
FBR-1800TX Broadband Router.
Clicking this button will open a Window which lists all system
details and settings.
This indicates the current status of the printer. Possible values
are:
•
Idle
•
Printing
•
Off-line
•
Out of paper
Click this button to terminate the current print job. This button
should be used if the current print job is not printing correctly.
38