Setup Wizard - LevelOne FBR-1800TX User Manual

Setup Wizard

The first time you connect to the LevelOne FBR-1800TX Broadband Router, the Setup Wizard
will run automatically. (The Setup Wizard will also run if the LevelOne FBR-1800TX Broad-
band Router's default setting are restored.)
1. Step through the Wizard until finished.
•
You need to know the type of Internet connection service used by your ISP. Check
the data supplied by your ISP.
•
The common connection types are explained in the tables below.
2. On the final screen of the Wizard, run the test and check that an Internet connection can be
established.
3. If the connection test fails:
•
Check your data, the Cable/DSL modem, and all connections.
•
Check that you have entered all data correctly.
•
If using a Cable modem, your ISP may have recorded the MAC (physical) address of
your PC. Run the Wizard, and on the Cable Modem screen, use the "Clone MAC ad-
dress" button to copy the MAC address from your PC to the LevelOne FBR-1800TX
Broadband Router.
Common Connection Types
Cable Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
DSL Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
PPPoE
Details
Your IP Address is allocated
automatically, when you
connect to you ISP.
Your ISP allocates a perma-
nent IP Address to you.
Details
Your IP Address is allocated
automatically, when you
connect to you ISP.
Your ISP allocates a perma-
nent IP Address to you.
You connect to the ISP only
when required. The IP address
is usually allocated automati-
cally.
ISP Data required
Usually, none.
However, some ISP's may
require you to use a particular
Hostname, Domain name, or
MAC (physical) address.
IP Address allocated to you.
Some ISP's may also require
you to use a particular Host-
name, Domain name, or MAC
(physical) address.
ISP Data required
None.
IP Address allocated to you.
User name and password.
Setup
11