LevelOne FBR-1800TX User Manual page 87

LevelOne FBR-1800TX Broadband Router User Guide
4. The printer wizard will display a message stating that "The Network
5. When finished, go to Control Panel-Printers. The printer icon will be
6. Right-click the Printer, and select Properties. Then select the Details
7. Click the Add Port button. On the resulting screen, select Other, then
Printer is off-line". This is OK. Continue the Add Printer Wizard until
finished.
grayed out indicating the printer is not ready.
tab, as shown below.
Shared Port, as the port to add, as shown below.
84