LevelOne FBR-1800TX User Manual page 13

LevelOne FBR-1800TX Broadband Router User Guide
If you can't connect
If the LevelOne FBR-1800TX Broadband Router does not respond, check the
following:
•
The LevelOne FBR-1800TX Broadband Router is properly installed, LAN
connection is OK, and it is powered ON. You can test the connection by using
the "Ping" command:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the LevelOne FBR-1800TX Broad-
band Router's IP Address. (See next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the range
192.168.0.2 to 192.168.0.254 to be compatible with the LevelOne FBR-
1800TX Broadband Router's default IP Address of 192.168.0.1. Also, the Net-
work Mask must be set to 255.255.255.0. See Chapter 4 - PC Configuration
for details on checking your PC's TCP/IP settings.
•
Ensure that your PC and the LevelOne FBR-1800TX Broadband Router are on
the same network segment. (If you don't have a router, this must be the case.)
10