Appendix A Troubleshooting; Overview; General Problems; Internet Access - LevelOne FBR-1800TX User Manual

1-port broadband router w/8 lan ports + printer server
Table of Contents

Advertisement

Appendix A
Troubleshooting
This Appendix covers the most likely problems and their solutions.

Overview

This chapter covers some common problems that may be encountered while using the Leve-
lOne FBR-1800TX Broadband Router and some possible solutions to them. If you follow the
suggested steps and the LevelOne FBR-1800TX Broadband Router still does not function
properly, contact your dealer for further advice.

General Problems

Problem 1:
Can't connect to the LevelOne FBR-1800TX Broadband Router to
configure it.
Solution 1:
Check the following:

Internet Access

Problem 1:
When I enter a URL or IP address I get a time out error.
A number of things could be causing this. Try the following troubleshooting
Solution 1:
steps.
The LevelOne FBR-1800TX Broadband Router is properly installed,
LAN connections are OK, and it is powered ON.
Ensure that your PC and the LevelOne FBR-1800TX Broadband Router
are on the same network segment. (If you don't have a router, this must
be the case.)
If your PC is set to "Obtain an IP Address automatically" (DHCP
client), restart it.
If your PC uses a Fixed (Static) IP address, ensure that it is using an IP
Address within the range 192.168.0.2 to 192.168.0.254 and thus com-
patible with the LevelOne FBR-1800TX Broadband Router's default IP
Address of 192.168.0.1.
Also, the Network Mask should be set to 255.255.255.0 to match the
LevelOne FBR-1800TX Broadband Router.
In Windows, you can check these settings by using Control Panel-
Network to check the Properties for the TCP/IP protocol.
Check if other PCs work. If they do, ensure that your PCs IP settings
are correct. If using a Fixed (Static) IP Address, check the Network
Mask, Default gateway and DNS as well as the IP Address.
If the PCs are configured correctly, but still not working, check the
LevelOne FBR-1800TX Broadband Router. Ensure that it is connected
and ON. Connect to it and check its settings. (If you can't connect to it,
check the LAN and power connections.)
If the LevelOne FBR-1800TX Broadband Router is configured cor-
A
82

Advertisement

Table of Contents
loading

Table of Contents