Document Hold-Down Rollers - GRAPHTEC CS510 SERIES Service Manual

8.17 Document Hold-down Rollers

Detaching the document hold-down rollers
(1) Detach the pinch roller covers (see Section 8.16).
(2) Remove the three M3L6 binding head screws holding each document hold-down roller spring plate.
M3L6 binding head screw
Document hold-down roller
Document hold-down roller spring plate
(3) Detach the document hold-down rollers from the top cover assembly.
(4) For the center document hold-down roller, remove the two M3L6 binding head screws holding the front
pinch roller cover holding bracket and then detach the front pinch roller cover holding bracket.
Remove the three M3L6 binding head screws holding the center document hold-down roller spring
plate. Detach the center document hold-down roller from the top cover assembly.
Reattaching the document hold-down rollers
(1) Reattach the document hold-down rollers in the reverse order in which they were detached.
CS510/IS210-UM-251-9370
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
M3L6 binding head screw
M3L6 binding head screw
M3L6 binding head screw
Front pinch roller cover holding bracket
8-18
M3L6 binding head screw