User Tools Menu (Copier Features) - Ricoh 7025 Operating Instructions Manual

User Tools Menu (Copier Features)

This section describes items you can set in the copier feature. The copier features
screen can be displayed by pressing the {User Tools/Counter} key. For details
about how to set up these items, see General Settings Guide.
Item
APS/ Auto R/E Priority
Auto Tray Switching
Original Type Setting
Duplex Mode Priority
Orientation
Max. Number of Sets
Original Count Display
Reproduction Ratio
Preset R/E Priority
Duplex Margin
Rotate Sort
Rotate Sort:Auto Continue If you select [Off] when the paper tray in use runs out of paper, the
Auto Sort
Letterhead Setting
Description
You can select [Auto Paper Select Priority] (APS Priority) or [Auto R/E
Priority] (Auto Reduce/Enlarge Priority).
If you load same size paper in two or more trays, the machine au-
tomatically shifts to the other tray using image rotation when the
first tray runs out of paper (if [On] is selected.) This function is
called "Auto Tray Switching". This setting specifies whether to
use Auto Tray Switching or not.
You can adjust copy finish quality level according to original type.
You can choose these functions after selecting [Original Type 1
(Text)] or [Original Type 2 (Photo)].
You can select the type of Duplex function effective when the ma-
chine is turned on, reset, or modes are cleared.
You can select the original orientation when using the Com-
bine/Series/Duplex, or Staple function. The default setting is [Do
not Specify]. When you select [Always Specify], you must select the
orientation of originals.
The maximum copy quantity can be set between 1 and 999 using
the number keys.
You can set to display the count of originals and copying pages on
the display when [On] is selected.
You can select which reduce, enlarge, or input ratio is shown on
the display with priority when [Reduce] or [Enlarge] is selected.
You can set the ratio with priority when [R/E] is selected.
Specify left margin on the back side of copies, and top margin on
the back side.
Specify whether or not to select rotate sort when the {Sort} key
(finisher not installed), or {Sort/Staple} key (finisher installed) is
pressed.
When you select [On], you can select [Rotate Sort].
You cannot use the bypass tray with this function.
If you select [Off] when the finisher is not installed, only the Sort
function is available when you press the {Sort} key.
machine stops, allowing you to add paper so all copies can be ro-
tate-sorted.
You can set whether Auto Sort is [On] or [Off] when the machine is
turned on, reset, or modes are cleared.
If you select [On] for this function, the machine rotates the image
correctly.
5