When You Have Problems Operating The Machine - Ricoh 7025 Operating Instructions Manual

When the Machine Does Not Operate As Wanted
When You Have Problems Operating the
Machine
1
The following chart gives explanations of common problems and messages.
If other messages appear, follow the instructions displayed.
Problem
"
Please wait...
appears.
" Please wait...
appears.
Although the copier
screen appears when
the machine is turned
on using the main
power switch, it cannot
be switched to another
screen by pressing the
{Facsimile} or {Scan-
ner} key.
The machine has just
been turned on and the
User Tools screen is
displayed, but the User
Tools menu has items
missing.
The display is difficult
to see.
The display is off.
The display is off.
Nothing happens
when the operation
switch is turned on.
The operation switch
indicator continues
blinking and does not
turn off when pressed.
6
Cause
This message appears when you
"
turn on the operation switch or
change the toner bottle.
If the machine has not been in use
"
for a long time, it may take longer
than normal to print or start up
when switched on.
Functions other than the copier
function are not yet ready.
Functions other than the copier
function are not yet ready. Time
required varies by function.
Functions appear in the User
Tools menu when they become
ready for use.
Display contrast is not adjusted.
The machine is in Energy Saver
mode.
The operation switch is turned
off.
The main power switch is turned
off.
The machine is communicating
with external equipment.
Solution
If the machine does not get start-
ed within 2 minutes, contact your
service representative.
Wait for the machine to get ready.
Wait a little longer.
Wait a little longer.
Adjust the display's contrast so
that you can see the display panel
properly. See "General Features",
General Settings Guide.
Turn on the operation switch.
Turn on the operation switch.
Turn on the main power switch.
Check if the machine is communi-
cating with external equipment.