Ricoh 7025 Operating Instructions Manual page 294

Placing Originals
Non-compatible originals for the ARDF
Placing the following types of originals in the ARDF can cause paper misfeeds
or light and black lines, or result in damage to the originals. Place these originals
1
on the exposure glass instead.
• Originals other than those specified in "Sizes and Weights of Recommended
Originals"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, alu-
minum foil, carbon paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin or highly flexible originals
• Thick originals such as postcards
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are still wet with ink or correction fluid
Note
❒ The original might become dirty if it is written with a pencil or a similar tool.
8