Energy Star Program - Ricoh 7025 Operating Instructions Manual

ENERGY STAR Program

ENERGY STAR
The ENERGY STAR
servation by promoting energy efficient computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multi-
function devices. Energy Star standards and logos are internationally uniform.
• Low Power mode
This machine automatically lowers its power consumption 15 minutes after
finishing the last copy or print job. Fax reception or printing is still possible in
Low Power mode, but to make copies, you have to press the operation switch
first.
• Off mode (Copier only)
To conserve energy, this machine automatically turns off 1 minute after finishing
the last copy or print job. In this manual, the Off mode is called the Auto Off mode.
• Sleep mode (Fax, printer, or scanner installed)
If there is a fax, printer, or scanner unit installed, this machine automatically
lowers its power consumption even further 1 minute after finishing the last
copy or print job. Fax reception or printing is still possible in Sleep mode, but
to make copies, you have to press the operation switch first.
Note
❒ If you want to operate this machine while it is in either of these modes, do
one of the following:
• Turn on the operation switch.
• Place originals in the ARDF.
Reference
"Timer Settings", General Settings Guide
• Duplex Priority
We recommend the duplex function. This function is less of a burden to the
environment. For applicable machines, duplex function (one-sided originals
→ two-sided copies) is selected preferentially when the operation switch or
the {Clear Modes} key is pressed, or the machine resets automatically.
10
®
Program Requirements for Imaging Equipment
®
Program Requirements for Imaging Equipment encourage energy con-