Ricoh 7025 Operating Instructions Manual page 219

Message
Cannot detect
original size
Select scan
size.
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at n.)
You do not have
privileges to
use this func-
tion.
LDAP server
search timed
out. Check the
server status.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
Connection has
failed. Check
settings and
check Scanned
File Status.
Cause
You have loaded paper of a size
not shown in Paper Size Settings
with User Tools.
Search results have exceeded the
maximum displayable number.
The use of this function is restrict-
ed to authentified users only.
A network error has occurred and
connection has failed.
The specified group contains
some e-mail destinations and
Scan to Folder destinations.
The correct network settings are
not made.
When a Message Is Displayed
Solution
• Place the original correctly.
• Specify the scan size.
• When placing an original di-
rectly on the exposure glass,
the lifting/ lowering action of
the ARDF triggers the auto-
matic original size detection
process. Lift the ARDF by
more than 30 degrees. See
"Placing Originals", Copy
Reference.
Search again after changing the
search conditions.
Contact the administrator.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See "Administrator Tools",
General Settings Guide.
Press [Select] for the message dis-
played on the screen for each
transmission.
• Check the network settings of
the client computer.
• Check that components such
as the LAN cable are connect-
ed properly.
• Check that the server settings
are correct and the server is
working properly.
5
61