Table of Contents
Advertisement
Error Codes
The following table lists error codes that you may encounter, and the actions to perform
to correct the reported error.
Table 1. Firmware Error Codes.
Error Code
20A80000
20A80001
20A80005
20E00001
20E00009
20EE0003
20EE0004
20EE0005
20EE0007
20EE0008
20EE000B
Description
Action
Insufficient
Verify the IP address.
information to
boot.
Client IP address
Change IP address.
is already in use
by other network
device
File transmission
Check network connection, try again.
(TFTP) failed.
Privileged-access
The password has been entered incorrectly.
password entry
Retry installing the password.
error.
Invalid password
The password has been entered incorrectly 3 times.
entered - system
Turn off, then turn on the system unit, then enter the
locked
password correctly.
IP parameter
Enter valid IP parameter.
requires 3 dots "."
Example: 000.000.000.000
Invalid IP
Enter valid IP parameter.
parameter
Example: 000.000.000.000
Invalid IP
Enter valid IP parameter.
parameter (>255)
Example: 255.192.002.000
Keyboard not
Plug in keyboard.
found
No configurable
This warning occurs when the selected SMS function
adapters found in
cannot locate any devices/adapters supported by the
the system
function. If a supported device is installed, contact your
service representative.
The system was
Modify the Boot Sequence (also known as boot list) to
not able to find an
include devices that are known to contain a copy of the
operating system
Operating System. This can be accomplished by using
on the device list
the System Management Services Menus. For example,
that was
select a hard disk known to have a copy of the
attempted.
Operating System as the first and only device in the
boot sequence (boot list) and attempt to boot again.
Chapter 8. Hardware Problem Determination
191
Advertisement
Chapters
Table of Contents
