Cleaning The Mouse - IBM Enterprise Server S80 User Manual

Cleaning the Mouse

Use the following procedure to clean the mouse:
1. Remove the retaining ring by turning it counterclockwise.
2. Remove the ball.
3. Inspect the ball for contaminants. Wipe it clean with a dry, lint-free cloth.
4. If the ball is dirty, wash it in warm, soapy water. Rinse and wipe the ball with a
lint-free cloth until dry.
5. Inspect the ball cavity in the mouse for foreign materials. If there are any foreign
materials, remove them.
6. Replace the ball.
7. Replace the retaining ring on the mouse and align it with the open slots in the ball
cavity.
8. Turn the retaining ring clockwise until the open slots are covered and you hear the
ring snap into place.
Retaining Ring
Ball
Cavity
Chapter 2. Using the System
21