General Attributes Always Required - IBM Enterprise Server S80 User Manual

General Attributes Always Required

The following general attributes are the default settings for the diagnostics. Be sure
your terminal is set to these attributes.
Note: These attributes should be set before the diagnostics are loaded.
Refer to the following table.
General Setup
Attributes
Machine mode
Generated Code Set
Screen
Row and filemn
Scroll
Auto LF
CRT saver
110
S80 and S85 User's Guide
3151 3151 3161/ 3164
/11/31/41 /51/61 Settings
Settings Settings
3151 3151 PC 3161 or
3164
ASCII
Normal Normal
24 x 80 24 x 80
Jump Jump Jump
Off Off Off
Off Off 10
Description
The diagnostics are set to
emulate use of the 3161 ASCII
Display Terminal. If your terminal
can emulate a 5085, 3161, or
3164 terminal, use the attribute
settings in this table. Otherwise,
refer to your operator's manual,
compare the attribute setting
descriptions in this table with
those of your terminal, and set
your attributes accordingly.
Uses the EIA-232 interface
protocol.
Uses the EIA-232 interface
protocol.
When the last character on the
bottom line is entered, the screen
moves down one line.
For the "On" setting, pressing the
Return key moves the cursor to
the first character position of the
next line. For the "Off" setting,
pressing the Return key moves
the cursor to the first character
position of the current line. The
CR and LF characters are
generated by the New line
setting.
The "10" setting causes the
display screen to go blank if there
is no activity for 10 minutes.
When the system unit sends data
or a key is pressed, the display
screen contents are displayed
again.