IBM Enterprise Server S80 User Manual page 69

e. Move the carrier latch to the locked position. If the carrier does not lock, check
that the drive carrier is fully seated in the backplane. When the drive carrier is
fully seated and power is turned on, the green LED on the drive carrier
illuminates.
The following table explains the meaning of the green and amber status LEDs and
spin down button on a SCSI disk drive.
Status LEDs
LED or Button
Amber
Green
Spin down
5. If you have other hot-swap disk drives to insert, go to page 49.
6. If you do not have any other procedures to perform, replace the cover that you
removed in step 2 on page 48.
7. Close the Input/output Rack door.
8. Go to "Unconfiguring (Removing) or Configuring a Disk Drive" on page 47 and
configure the disk drive unit you just inserted.
Status
On
Off
On
Off
Blinking
Depressed
Definition
Drive spinning
Drive not spinning
Power On
Power Off
Power Off/Drive identify
Spin down drive and remove
power
Chapter 2. Using the System
51