Display Test Patterns - IBM Enterprise Server S80 User Manual

Flags:
-l
-a
-t token
-i index
-v
Examples:
1. Display a list of the environmental sensors:
/usr/lpp/diagnostics/bin/uesensor -l
Sensor = Fan Speed Status = Normal Value = 2436 RPM Location Code = F1
Sensor = Power Supply Status = Normal Value = Present and operational Location
Code = V1
Sensor = Power Supply *Status = Critical low Value = Present and not operational
Location Code = V2
2. Display a list of the environmental sensors in a numerical list:
/usr/lpp/diagnostics/bin/uesensor -a
3 0 11 87 P1 9001 0 11 2345 F1 9004 0 11 2 V1 9004 1 9 2 V2
3. Return the status of sensor 9004, index 1:
/usr/lpp/diagnostics/bin/uesensor -t 9004 -i 1
9
4. Return the value of sensor 9004, index 1:
/usr/lpp/diagnostics/bin/uesensor -t 9004 -i 1 -v
2

Display Test Patterns

This service aid provides a means of adjusting system display units by providing
displayable test patterns. Through a series of menus the user selects the display type
and test pattern. After the selections are made the test pattern is displayed.
List the sensors and their values in a text format.
List the sensors and their values in a numerical format. For each sensor, the
following numerical values are displayed as:
<token> <index> <status> <measured value> <location code>
Specifies the sensor token to query.
Specifies the sensor index to query.
Indicates to return the sensor measured value. The sensor status is returned by
default.
Chapter 6. Introduction to Tasks and Service Aids
157