Password Utilities - IBM Enterprise Server S80 User Manual

Password Utilities

Entering this selection permits access to the options shown on the following screen:
Password Utilities
1 Set Privileged Access-Password
2 Remove Privileged-Access Password
3 Unattended Start Mode <ON>
===>
Set Privileged-Access Password: The privileged-access password protects against
the unauthorized starting of the system programs. When this option is selected, another
screen appears that allows the setting of a password.
Both the service processor and System Management Services use this password. The
password can be set from either the service processor or System Management
Services menus. Once the password is set, both the service processor and System
Management Services automatically use the same password. The password is limited
to eight characters.
Remove Privileged-Access Password: If you previously had set a privileged-access
password and want to remove it, select Remove Privileged-Access Password.
Unattended Start Mode <ON>: This selection is used to enable/disable unattended
start mode. Use this option to instruct the service processor to restore the power-state
of the server after a temporary power failure, which is necessary on servers that require
automatic power-on after a power failure. The default setting is ON.
96
S80 and S85 User's Guide
.------.
|X=Exit|
'------'