Martin Tripix 300 User Manual page 27

power cable is necessary) to extend the link from the last fixture in
Group 1 to the "In" connector of group 2's Power Inserter cable.
Power 2/data
Figure 18: Extending the DMX data link
Extending the power link
1. See Figures 19 and 20. If you need to extend the distance
between a Tripix Power device and Power Inserter cable, you can
use Tripix Cable Adapters. Only a power cable (arrowed) is
needed as no data is transferred.
Figure 19: Extending Tripix Power and Power Inserter
Figure 20: Only power cable needed
Tripix
48 V DC
power 2
Power
O ut In
TM
Series User Manual
48 V DC
power 1
Power 1/data
Powe r
Out In
DMX
data
DMX
27