Martin Tripix 300 User Manual page 17

exposed to water, moisture can be drawn up the inside of the cable due
to the vacuum effect of temperature fluctuations during operation.
Power plug
The Tripix Power and Tripix Power IP66 can be hard-wired to a
building's AC mains electrical installation, but if you decide to fit the
power cable with a plug that is suitable for your AC mains power outlets,
install a grounding-type (earthed) plug following the plug
manufacturer's instructions.
Table 1 shows some possible pin identification schemes; if pins are not
clearly identified, or if you have any doubts about proper installation,
consult a qualified electrician.
Wire color
(US system)
Black
White
Green
Table 1: Cable color-coding and conductor identification
Tripix Power
The Tripix Power is supplied with a power input cable with an IEC
female plug at one end for connection to the Tripix Power's power input
socket.
If you replace this cable, use only cable that meets the specifications
given under "Power input cable" on the previous page.
Tripix Power IP66
A power input cable that meets the specifications given under "Power
input cable" on the previous page must be supplied by the user. The
cable must have an external diameter of 5 – 9.5 mm (0.2 – 0.37 in.),
otherwise the power cable entry gland will not be effective to IP66.
Wire color
(EU system)
Brown
Blue
Yellow/Green
TM
Tripix Series User Manual
Conductor Symbol
Live L
Neutral N
Ground
(Earth)
Screw (US)
Yellow or
Brass
Silver
Green
17