Printer Test
1.
Using the arrow keys, highlight POS
2. Press [->] to move to the right side window.
3.
Select the Logical
4. Select the correct printer profile.
Note: If your Printer is not listed you can modify the parameters of the current one
or create a new one by selecting Create a New Name. Press [F8] to save all changes.
Keep in mind that all changes are lost when you end this session.
5. Make any necessary changes to the profile.
Example: If your printer is connected to a different COM port than what is shown
in the profile you can change the setting. Press [F8] to save the changes to the
current profile.
6.
Highlight Run Interactive
7. Exit the test by pressing [Esc].
Scanner Test
1. Using the arrow keys, highlight Scanner and then press [Enter].
2. Press [->] to move to the right side window.
3. Select the correct Scanner profile.
Note: If your Scanner is not listed you can modify the parameters of the current
one or create a new one by selecting Create a New
changes are lost when you end this session.
4. Make any necessary changes to the profile.
Example: If your scanner is connected to a different COM port than what is shown
in the profile you can change the setting. Press [F8] to save the changes to the
current profile.
5.
Highlight Run Interactive Diagnostics
6. Scan a barcode label within the timeout period displayed. With a valid read the
barcode information is displayed.
7. Exit the test by pressing [Esc].
Printer and then press [Enter].
Name field and then press [Enter].
Diagnostic and then press [Enter].
Name. Keep in mind that all
and then press [Enter].
Diagnostics
11