NCR RealPOS 60 Hardware Service Manual page 4

iv
Peripheral Usage
This terminal should only be used with peripheral devices that are certified by the
appropriate safety agency for the country of installation (UL, CSA, TUV, VDE) or those
which are recommended by NCR Corporation.
Warning: DO NOT connect or disconnect the transaction printer while the terminal
is connected to AC power. This can result in system or printer damage.
Warning: DO NOT connect or disconnect any serial peripherals while the terminal
is connected to AC power. This can result in system or printer damage.
Grounding Instructions
In the event of a malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is
equipped with an electric cord having an equipment‐grounding conductor and a
grounding plug. The plug must be plugged into a matching outlet that is properly
installed and grounded in accordance with all local codes and ordinances. Do not
modify the plug provided – if it will not fit the outlet, have the proper outlet installed
by a qualified electrician. Improper connection of the equipment‐grounding conductor
can result in a risk of electric shock.
The conductor with insulation having an outer surface that is green with or without
yellow stripes is the equipment‐grounding conductor.
If repair or replacement of the electric cord or plug is necessary, do not connect the
equipment‐grounding conductor to a live terminal. Check with a qualified electrician
or service personnel if the grounding instructions are not completely understood, or if
you are in doubt as to whether the product is properly grounded.
Use only 3‐wire extension cords that have 3‐prong grounding plugs and 3‐pole
receptacles that accept the product's plug. Repair or replace damaged or worn cords
immediately.
References
• NCR RealPOS 60 Site User Guide (B005‐0000‐2011)
• NCR RealPOS 60 Site Preparation Guide (B005‐0000‐2012)
• NCR RealPOS 60 Parts Identification Manual (B005‐0000‐2014)
Revision Record
Issue Date Remarks
A Oct 2010 First Issue
B Aug 2012 Release 1.1