Installing The Transaction Printer - NCR EX15 POS User Manual

2-17 Hardware Installation

Installing the Transaction Printer

To connect the printer to the EX15 terminal, follow these steps:
1. Connect one end of the Printer Communications Cable (1416-C879-0040) to the
printer and the other end to the Serial Adapter (1432-C825-0004).
2. Connect the other end of the Serial Adapter to one of the COM ports on the EX15.
3. Connect the Power Supply Cable to the printer.
4. Connect the AC Power Cord to the Power Supply and then to an AC outlet.
Note: For more information on the POS printer, refer to printer documentations on
https://info.ncr.com.