Installing The New Motherboard - NCR RealPOS 60 Hardware Service Manual

14 Hardware Disassembly

Installing the New Motherboard

12. Install the CPU Module.
a. Make sure the ZIFF Locking Screw is in the unlocked position (fully counter
clockwise).
b. Correctly position the new CPU over the CPU Socket, with the gold triangle
located as shown below.
Caution: Do not touch the CPU contacts.
c. Do not insert the CPU at an angle or force the CPU into the socket.
d. Drop it in by its own weight.
Gold Triangle
CPU
Pins
Incorrect
Pin 1 Markers
Correct
28762
26158