Installing The Transaction Printer - NCR RealPOS 70XRT Kit Instructions

9

Installing the Transaction Printer

The NCR 7167, 7168, 7197, or 7198 printer can be located on either side of the
Integration Tray.
Note: The Printer Cable Strain Relief is different on the Release 1.0 and the Series II
printers. The Cable Strain Relief on Release 1.0 printers prevents the printer from
sitting properly in the Integration Tray and must be removed from the printer and
installed in the Integration Tray.
NCR 7167/7168 Release 1.0 Printers Only:
1. Remove the Cable Strain Relief from the back of the printer (2 screws). The printer
2. Install the Cable Strain Relief on the Integration Tray using the same screws.
will not sit properly in the tray with it installed.
7167/68 Release 1.0 Printer
Cable Strain Relief
7167/68 Series II Printer
Do not remove the Cable Strain Relief
on Series II printers.
26318a