NCR RealPOS 60 Hardware Service Manual page 30

8 Hardware Disassembly
b. Remove the screws (2) from the back of the terminal that secure the Daughter
Card Assembly.
4. Remove the Cooling Solution Assembly
a. Remove the screws (2) that secures the Cooling Solution Assembly to the
chassis.
b. Loosen the spring‐loaded captive screws (6) that secure the Cooling Solution
Assembly to the Motherboard.
Note: Use a sequential rotating pattern when loosening the spring‐loaded screws.
Loosen each screw a little at a time to evenly raise the Heatsink from the CPU.
Screws
Screws
28682
Captive Screws (6)
28749