Table of Contents
Advertisement
Appendix C
Introduction
This Appendix describes the BIOS settings of the third party PXE Boot agent provided by Ampro
and integrated into the ReadyBoard 800 firmware. The PXE Boot Agent's BIOS setup menu and
screens are used when configuring the LAN boot feature in the ReadyBoard 800 BIOS.
The third party PXE Boot agent provided by Ampro supports multiple boot protocols and network
environments such as traditional TCP/IP, NetWare, and RPL. It also includes support for all of the
most used protocols including DHCP, BOOTP, RPL, NCP/IPX (802.2, 802.3, Ethernet II), and the
Wired for Management (WfM) 2.0 specification for Preboot Execution Environment (PXE).
Accessing PXE Boot Agent BIOS Setup
To access PXE Boot Agent BIOS Setup when LAN Boot has been selected in the ReadyBoard 800
BIOS Setup screen, refer to this procedure:
1. Reboot the ReadyBoard 800 after selecting LAN 1 or LAN 2 in BIOS Setup.
The default setting for LAN boot is [None].
2. Access the LAN Boot Setup by pressing the Ctrl +Alt + B keys, when the following message
appears on the boot screen.
Initializing MBA.
3. Select from the menu options when the default screen appears as shown in Figure C-1.
4. Follow the instructions at the bottom of the screen to navigate through the selections and modify
any settings.
NOTE
The default values are shown highlighted (bold text) in the list of options
on the following pages.
Refer to the bottom of the Setup screen for navigation instructions and
when making selections.
ReadyBoard 800
PXE Boot Agent BIOS Setup
Press Ctrl + Alt + B to configure ..
Reference Manual
85
Advertisement
Table of Contents
